Vulcanizing Presses HYDRAULIC

  • high level of safety by inserting traction bolts into the cross beam profile
  • conventional, robust heating plates combined with hydraulic pressure systems allow splicing even on partially worn belts
  • heating plate with air or water cooling
  • exact temperature regulation via an electronic control box
  • easier and faster pressure buildup by using a piston hand pump or motor pump unit

Heating plates

  • heating plates of frame-type construction, made of a highquality corrosion-resistant aluminium alloy
  • shape: rhombic 16° 42’; 22°, rectangular 90°
  • optionally available with air and/or water cooling
  • robust, flush fitting electrical connections guarantee safe operation
  • optimum pressure and temperature distribution
  • minimum temperature tolerance over the entire heating plate

 

 

Cross beams with hydraulic pressure system

  • special profiles made of high-alloy aluminum
  • maximum tensile and bending strength with minimum weight
  • built-in protection against hose breakage, the cross beam pressure being maintained in the event of a hose breakage or a sudden pressure drop
  • compact high-pressure hydraulic light metal cylinders for uniform surface pressure
  • high quality thermal insulation made of u-shaped fibre glassreinforced polyester in the top cross beam
  • the surface area of the lower cross beam is covered with a wear-resistant insulating material

Pumps

  • reciprocating piston hand pump or motor-driven pump
  • distributor
  • high-pressure hoses
  • hydraulic oil

Reciprocation piston hand pump

  • pressure limited to 450 bar
  • oil filling 8 liter (usable oil volume = 6,8 liter)
  • automatic switchover from low-pressure operation to high-pressure
  • pressure gauge for pressure control

Motor-driven pump unit

  • pressure limited to 450 bar
  • supplied complete with tubular protective frame, pressure hose coupling and valves
  • 400 V, 50 Hz *
  • capacity 1,1 kW
  • filling volume hydraulic oil: 17 liter or 35 liter

Hose distributor

  • matches the number of cross beams

Control box with electronic temperature control system

  • electrical connection as per CEE standards
  • exact temperature reading in each heating plate via thermo sensor PT 100
  • electronic controller with digital display of setpoint and actual temperatures
  • quick and simple programming of the electronic temperature control
  • in case of electronic controll failure, manual operation is possible as well
  • the controller tolerance is only about 1% of the value set
  • timer
  • differential monitoring of the individual heating circuits
  • optional: three-phase current- or single-phase power outlet at 400 Volt
Control boxInputOutput
2-plug 400 V, 32 A2 x 16 A
4-plug400 V, 63 A4 x 16 A
2-plug400 V, 63 A2 x 32 A

Any questions? Please contact us here.

* Other voltages on request